Il mio Profilo
Sabina Luisa Campanelli
Ricercatore
ING-IND/16 TECNOLOGIE E SISTEMI DI LAVORAZIONE

Home

...
+39 080 596 2772
+39 080 596 2788
Sezione Tecnologie e Impianti
Viale Japigia 182

Pubblicazioni

Il seguente elenco è solo una parte della Produzione scientifica del docente.
Per maggiori informazioni consultare il Catalogo Istituzionale dei prodotti della Ricerca (IRIS) .


  1. Contuzzi N, Campanelli S L, Casalino G and Ludovico A D. On the role of the Thermal Contact Conductance during the Friction Stir Welding of an AA5754-H111 butt joint. APPLIED THERMAL ENGINEERING 104:263–273, 2016. URL, DOI BibTeX

    @article{ 11589_76955,
    	author = "Contuzzi N and Campanelli S L and Casalino G and Ludovico A D",
    	title = "On the role of the Thermal Contact Conductance during the Friction Stir Welding of an AA5754-H111 butt joint",
    	year = 2016,
    	journal = "APPLIED THERMAL ENGINEERING",
    	volume = 104,
    	keywords = "Finite element analysis; Friction Stir Welding; Thermal Contact Conductance; Energy Engineering and Power Technology; Industrial and Manufacturing Engineering",
    	url = "http://www.journals.elsevier.com/applied-thermal-engineering/",
    	doi = "10.1016/j.applthermaleng.2016.05.071",
    	pages = "263--273"
    }
    
  2. Campanelli Sabina L, Casalino Giuseppe, Mortello Michelangelo, Angelastro Andrea and Ludovico Antonio Domenico. Microstructural characteristics and mechanical properties of Ti6Al4V alloy fiber laser welds. In Procedia CIRP 33. 2015, 428–433. URL, DOI BibTeX

    @conference{ 11589_76967,
    	author = "Campanelli Sabina L and Casalino Giuseppe and Mortello Michelangelo and Angelastro Andrea and Ludovico Antonio Domenico",
    	title = "Microstructural characteristics and mechanical properties of Ti6Al4V alloy fiber laser welds",
    	year = 2015,
    	publisher = "Elsevier",
    	journal = "PROCEDIA CIRP",
    	volume = 33,
    	booktitle = "Procedia CIRP",
    	keywords = "Fiber laser welding; Metallurgical and mechanical characterisatio; Titanium alloy; Control and Systems Engineering; Industrial and Manufacturing Engineering",
    	url = "http://www.sciencedirect.com/science/journal/22128271",
    	doi = "10.1016/j.procir.2015.06.098",
    	pages = "428--433"
    }
    
  3. Campanelli Sabina, Contuzzi Nicola, Lavecchia Fulvio and Percoco Gianluca. Analysis of Shape Geometry of Micro-Channels Fabricated by Laser Milling. In Proceedings of the 4M/ICOMM2015 Conference. 2015, 327–330. DOI BibTeX

    @conference{ 11589_58404,
    	author = "Campanelli Sabina and Contuzzi Nicola and Lavecchia Fulvio and Percoco Gianluca",
    	title = "Analysis of Shape Geometry of Micro-Channels Fabricated by Laser Milling",
    	year = 2015,
    	booktitle = "Proceedings of the 4M/ICOMM2015 Conference",
    	doi = "10.3850/978-981-09-4609-8_083",
    	pages = "327--330"
    }
    
  4. Casalino G, Campanelli SL, Contuzzi N and Ludovico AD. Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel. OPTICS AND LASER TECHNOLOGY 65:151–158, 2015. DOI BibTeX

    @article{ 11589_5666,
    	author = "Casalino G and Campanelli SL and Contuzzi N and Ludovico AD",
    	title = "Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel",
    	year = 2015,
    	journal = "OPTICS AND LASER TECHNOLOGY",
    	volume = 65,
    	abstract = "Selective Laser Melting (SLM) is an Additive Manufacturing process (AM) that built parts from powder using a layer-by-layer deposition technique. The control of the parameters that influence the melting and the amount of energy density involved in the process is paramount in order to get valuable parts. The objective of this paper is to perform an experimental investigation and a successive statistical optimization of the parameters of the selective laser melting process of the 18Ni300 maraging steel. The experimental investigation involved the study of the microstructure, the mechanical and surface properties of the laser maraging powder. The outcomes of experimental study demonstrated that the hardness, the mechanical strength and the surface roughness correlated positively to the part density. Parts with relative density higher than 99% had a very low porosity that presented closed and regular shaped pores. The statistical optimization determined that the best part properties were produced with the laser power bigger than 90 W and the velocity smaller than 220 mm/s.",
    	keywords = "Optimization; OptimizatSelective laser melting; Statistical analysis",
    	doi = "10.1016/j.optlastec.2014.07.021",
    	pages = "151--158"
    }
    
  5. Casalino Giuseppe, Mortello Michelangelo and Campanelli Sabina L. Ytterbium fiber laser welding of Ti6Al4V alloy. JOURNAL OF MANUFACTURING PROCESSES 20:250–256, 2015. URL, DOI BibTeX

    @article{ 11589_58161,
    	author = "Casalino Giuseppe and Mortello Michelangelo and Campanelli Sabina L",
    	title = "Ytterbium fiber laser welding of Ti6Al4V alloy",
    	year = 2015,
    	journal = "JOURNAL OF MANUFACTURING PROCESSES",
    	volume = 20,
    	abstract = "In this work, full penetration welding of 2 mm thick Ti6Al4V plates in butt configuration was performed by adopting a high brightness Yb fiber laser. Neither groove preparation nor filler groove was used. The influence of different welding conditions on the bead morphology, metallurgy and mechanical properties was discussed in detail. Seam appearance and microstructures were assessed by optical microscopy, while the mechanical behavior was evaluated in terms of Vickers micro-hardness and tensile strength. Fracture surfaces were inspected by scanning electron microscopy. The efficiency of the welding process was estimated by correlating the power transmitted and the extension of the fusion zone. The defectiveness of the bead geometry was minimized by optimizing the welding conditions.",
    	keywords = "Fiber laser welding; Metallurgical and mechanical properties; Ti6Al4V titanium alloy; Industrial and Manufacturing Engineering; Management Science and Operations Research; Strategy and Management1409 Tourism, Leisure and Hospitality Management",
    	url = "http://www.elsevier.com/wps/find/journaldescription.cws_home/620379/description#description",
    	doi = "10.1016/j.jmapro.2015.07.003",
    	pages = "250--256"
    }
    
  6. Casalino G, Campanelli S, Contuzzi N, Angelastro A and Ludovico AD. Laser assisted friction stir welding of aluminum alloy lap joints: Microstructural and microhardness characterizations. Volume 8963, 2014. DOI BibTeX

    @inbook{ 11589_8258,
    	author = "Casalino G and Campanelli S and Contuzzi N and Angelastro A and Ludovico AD",
    	title = "Laser assisted friction stir welding of aluminum alloy lap joints: Microstructural and microhardness characterizations",
    	year = 2014,
    	journal = "PROCEEDINGS OF SPIE, THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING",
    	volume = 8963,
    	booktitle = "High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III",
    	abstract = "Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. The laser Assisted Friction Stir Welding (LAFSW) combines a Friction Stir Welding machine and a laser system. Laser power is used to preheat and to plasticize the volume of the workpiece ahead of the rotating tool; the workpiece is then joined in the same way as in the conventional FSW process. In this work an Ytterbium fiber laser with maximum power of 4 kW and a commercial FSW machine were coupled. Both FSW and LAFSW tests were conducted on 3 mm thick 5754H111 aluminum alloy plates in lap joint configuration with a constant tool rotation rate and with different feed rates. The two processes were compared and evaluated in terms of differences in the microstructure and in the micro-hardness profile.",
    	doi = "10.1117/12.2042215"
    }
    
  7. Campanelli S L, Casalino G, Contuzzi N, Angelastro A and Ludovico A D. Analysis of the molten/solidified zone in selective laser melted parts. Volume 8963, pages 896311-1–896311-8, Friedhelm Dorsch, Editor(s), 2014. DOI BibTeX

    @inbook{ 11589_2693,
    	author = "Campanelli S L and Casalino G and Contuzzi N and Angelastro A and Ludovico A D",
    	title = "Analysis of the molten/solidified zone in selective laser melted parts",
    	year = 2014,
    	publisher = "Friedhelm Dorsch, Editor(s)",
    	journal = "PROCEEDINGS OF SPIE, THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING",
    	volume = 8963,
    	booktitle = "Proceedings of SPIE - Volume 8963",
    	abstract = {The process of Selective Laser Melting (SLM) is an innovative technology for rapid prototyping that can be included among the SFF (Solid Freeform Fabrication) techniques, which are characterized by "free-form" manufacturing of solid parts. SLM is an additive technology that operates starting from the data encoded in the three-dimensional computer aided design (CAD) file of the component to be built. After the slicing operation made on the 3D model of the component, the consequent data file is sent to a computer-controlled laser device that fuses successive layers of metal powder to create the three-dimensional product. The SLM is a technological process which involves optical, thermal and solidification phenomena; thus the analysis of the process is rather complex. This work aims to study the molten/solidified zone in SLM samples through the experimental analysis of the shape and the size of laser tracks. The functional relationships between dimensional parameter of the molten/solidified track and the main parameters used to control the process was identified. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.},
    	keywords = "Lasers , Manufacturing , Metals , Rapid manufacturing , Computer aided design , Computing systems , Fabrication",
    	doi = "10.1117/12.2042170",
    	pages = "896311-1--896311-8"
    }
    
  8. Campanelli S L, Contuzzi N, Ludovico A, Caiazzo F, Cardaropoli F and Sergi V. Manufacturing and characterization of Ti6Al4V lattice components manufactured by selective laser melting. MATERIALS 7:4803–4822, 2014. DOI BibTeX

    @article{ 11589_971,
    	author = "Campanelli S L and Contuzzi N and Ludovico A and Caiazzo F and Cardaropoli F and Sergi V",
    	title = "Manufacturing and characterization of Ti6Al4V lattice components manufactured by selective laser melting",
    	year = 2014,
    	journal = "MATERIALS",
    	volume = 7,
    	abstract = "The paper investigates the fabrication of Selective Laser Melting (SLM) titanium alloy Ti6Al4V micro-lattice structures for the production of lightweight components. Specifically, the pillar textile unit cell is used as base lattice structure and alternative lattice topologies including reinforcing vertical bars are also considered. Detailed characterizations of dimensional accuracy, surface roughness, and micro-hardness are performed. In addition, compression tests are carried out in order to evaluate the mechanical strength and the energy absorbed per unit mass of the lattice truss specimens made by SLM. The built structures have a relative density ranging between 0.2234 and 0.5822. An optimization procedure is implemented via the method of Taguchi to identify the optimal geometric configuration which maximizes peak strength and energy absorbed per unit mass.",
    	keywords = "Ti6Al4V titanium alloy; Selective laser melting; Micro-lattice structures",
    	doi = "10.3390/ma7064803",
    	pages = "4803--4822"
    }
    
  9. Casalino G, Campanelli S and Mortello M. Influence of shoulder geometry and coating of the tool on the friction stir welding of aluminium alloy plates. PROCEDIA ENGINEERING 69:1541–1548, 2014. BibTeX

    @article{ 11589_729,
    	author = "Casalino G and Campanelli S and Mortello M",
    	title = "Influence of shoulder geometry and coating of the tool on the friction stir welding of aluminium alloy plates",
    	year = 2014,
    	journal = "PROCEDIA ENGINEERING",
    	volume = 69,
    	abstract = "Friction Stir Welding (FSW) has demonstrated a significant potential for joining low melting point non-ferrous metals in several joint configurations. During FSW metals are joined in the solid state due to the heat generated by the friction and flow of metal by the stirring action of a pinned tool. This paper reports an experimental investigation on the effects of geometry and surface coating of the tool shoulder on the defectiveness, the microstructure and the microhardness of a 3 mm thick 5754H11 aluminium alloy butt weld. During the experiments the diameter and slope of the shoulder varied. Moreover a tungsten carbide coated was tested. The pin geometry and dimensions were kept constant. Four different tools for shoulder geometry and coating condition were tested. The weld was characterized in terms of the bead morphology and the grain size. The weld microhardness profile was measured for all the microstructural zones of the friction stir welding process. The obtained results provide a deeper knowledge of the effect of the tool shoulder geometry and surface condition on the aluminium alloy weldability",
    	pages = "1541--1548"
    }
    
  10. Pappalettere C, Casavola C, Foglia M, Trentadue B, Barile C, De Cillis F, Moramarco Vincenzo, Pappalettera G, Tursi G, Campanelli S, Ludovico A and Contuzzi N. Nuovo processo a basso impatto ambientale ed a ridotto rischio operativo per il recupero ed il riciclo dei materiali costituenti le batteria di piombo (Batterie). In Proceedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba. 2014. BibTeX

    @conference{ 11589_22933,
    	author = "Pappalettere C and Casavola C and Foglia M and Trentadue B and Barile C and De Cillis F and Moramarco Vincenzo and Pappalettera G and Tursi G and Campanelli S and Ludovico A and Contuzzi N",
    	title = "Nuovo processo a basso impatto ambientale ed a ridotto rischio operativo per il recupero ed il riciclo dei materiali costituenti le batteria di piombo (Batterie)",
    	year = 2014,
    	publisher = "Gangemi Editore",
    	address = "Roma",
    	booktitle = "Proceedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba",
    	keywords = "nuovo processo; basso impatto ambientale"
    }
    
  11. Campanelli S, Contuzzi N, De Filippis L, Angelastro A, Ludovico A and Serio L. Advanced Lightweight Structures Fabricated by Selective Laser Melting. In Proceedings of 1st Workshop on the State Of the Art and Challenges of Research Efforts at Poliba. 2014. BibTeX

    @conference{ 11589_23728,
    	author = "Campanelli S and Contuzzi N and De Filippis L and Angelastro A and Ludovico A and Serio L",
    	title = "Advanced Lightweight Structures Fabricated by Selective Laser Melting",
    	year = 2014,
    	publisher = "Gangemi Editore",
    	address = "Roma",
    	booktitle = "Proceedings of 1st Workshop on the State Of the Art and Challenges of Research Efforts at Poliba",
    	keywords = "Advanced Lightweight Structures ; Selective Laser Melting"
    }
    
  12. De Filippis L, Campanelli S, Ludovico A, Angelastro A, Contuzzi N, Marinzuli G, Serio L and Surace R. Cellular metal materials:production and characterization of aluminum foam. In Proceedings of 1st Workshop on the State of the Art and Challenges of Research Efforts at Poliba. 2014. BibTeX

    @conference{ 11589_20373,
    	author = "De Filippis L and Campanelli S and Ludovico A and Angelastro A and Contuzzi N and Marinzuli G and Serio L and Surace R",
    	title = "Cellular metal materials:production and characterization of aluminum foam",
    	year = 2014,
    	publisher = "Gangemi Editore",
    	address = "Roma",
    	booktitle = "Proceedings of 1st Workshop on the State of the Art and Challenges of Research Efforts at Poliba",
    	keywords = "Cellular metal materials; aluminum foam"
    }
    
  13. Ludovico A, Angelastro A, Campanelli S, Casalino G, Casavola C, Contuzzi N, De Filippis L, Moramarco V and Serio L. Innovative Techniques of Joining for Advanced Materials in Aeronautical Applications. In proceedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba. 2014. BibTeX

    @conference{ 11589_18457,
    	author = "Ludovico A and Angelastro A and Campanelli S and Casalino G and Casavola C and Contuzzi N and De Filippis L and Moramarco V and Serio L",
    	title = "Innovative Techniques of Joining for Advanced Materials in Aeronautical Applications",
    	year = 2014,
    	publisher = "Gangemi Editore",
    	address = "Roma",
    	booktitle = "proceedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba",
    	keywords = "Joining; advanced materials; aeronautical applications"
    }
    
  14. Campanelli S, De Filippis L, Ludovico A, Angelastro A, Contuzzi N, Serio L, Casavola C, Pappalettere C and Moramarco V. TEchnologies for Production, and Maintenance applied to Aeronautic Propulsion (TEMA project). In Proceeedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba. 2014. BibTeX

    @conference{ 11589_18454,
    	author = "Campanelli S and De Filippis L and Ludovico A and Angelastro A and Contuzzi N and Serio L and Casavola C and Pappalettere C and Moramarco V",
    	title = "TEchnologies for Production, and Maintenance applied to Aeronautic Propulsion (TEMA project)",
    	year = 2014,
    	booktitle = "Proceeedings of 1st Workshop on the state of the Art and Challenges of Research Efforts at Poliba",
    	keywords = "aeronautic propulsion; maintenance"
    }
    
  15. Campanelli S, Casalino G, Contuzzi N, Angelastro A and Ludovico AD. Proprietà e performance di materiali metallici ottenuti mediante Selective Laser Melting. APPLICAZIONI LASER febbraio/marzo 2014, 2014. BibTeX

    @article{ 11589_1460,
    	author = "Campanelli S and Casalino G and Contuzzi N and Angelastro A and Ludovico AD",
    	title = "Proprietà e performance di materiali metallici ottenuti mediante Selective Laser Melting",
    	year = 2014,
    	journal = "APPLICAZIONI LASER",
    	volume = "febbraio/marzo 2014"
    }
    
  16. CASALINO G, CAMPANELLI S and CAPECE MINUTOLO FM. Neuro-Fuzzy Model for the Prediction and Classification of the Fused Zone Levels of Imperfections in Ti6Al4V Alloy Butt Weld. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING 2013, 2013. BibTeX

    @article{ 11589_51885,
    	author = "CASALINO G and CAMPANELLI S and CAPECE MINUTOLO FM",
    	title = "Neuro-Fuzzy Model for the Prediction and Classification of the Fused Zone Levels of Imperfections in Ti6Al4V Alloy Butt Weld",
    	year = 2013,
    	journal = "ADVANCES IN MATERIALS SCIENCE AND ENGINEERING",
    	volume = 2013
    }
    
  17. Angelastro A, Campanelli S L, Casalino G and Ludovico A. Optimization of Ni-based WC/Co/Cr composite coatings produced by multilayer laser cladding. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING 2013, 2013. DOI BibTeX

    @article{ 11589_52145,
    	author = "Angelastro A and Campanelli S L and Casalino G and Ludovico A",
    	title = "Optimization of Ni-based WC/Co/Cr composite coatings produced by multilayer laser cladding",
    	year = 2013,
    	journal = "ADVANCES IN MATERIALS SCIENCE AND ENGINEERING",
    	volume = 2013,
    	doi = "10.1155/2013/615464"
    }
    
  18. CONTUZZI N, CAMPANELLI SL, CASAVOLA C and LAMBERTI L. Manufacturing and characterization of 18Ni Marage 300 lattice components by Selective Laser Melting. MATERIALS, pages 3451–3468, 2013. BibTeX

    @article{ 11589_52197,
    	author = "CONTUZZI N and CAMPANELLI SL and CASAVOLA C and LAMBERTI L",
    	title = "Manufacturing and characterization of 18Ni Marage 300 lattice components by Selective Laser Melting",
    	year = 2013,
    	journal = "MATERIALS",
    	pages = "3451--3468"
    }
    
  19. Casalino G, Campanelli S L, Maso U D and Ludovico A. Arc leading versus laser leading in the hybrid welding of aluminium alloy using a fiber laser. pages 151–156, 2013. BibTeX

    @inbook{ 11589_52460,
    	author = "Casalino G and Campanelli S L and Maso U D and Ludovico A",
    	title = "Arc leading versus laser leading in the hybrid welding of aluminium alloy using a fiber laser",
    	year = 2013,
    	booktitle = "Eighth CIRP Conference on Intelligent Computation in Manufacturing Engineering",
    	pages = "151--156"
    }
    
  20. Campanelli S L, Angelastro A, Ludovico A, Ferrara S and D’Alonzo M. Multi-Layer Laser Cladding per la realizzazione di rivestimenti in composito WC/Co/Cr su giranti di pompe per l’industria petrolifera. APPLICAZIONI LASER febbraio/marzo 2013:42–47, 2013. BibTeX

    @article{ 11589_647,
    	author = "Campanelli S L and Angelastro A and Ludovico A and Ferrara S and D’Alonzo M",
    	title = "Multi-Layer Laser Cladding per la realizzazione di rivestimenti in composito WC/Co/Cr su giranti di pompe per l’industria petrolifera",
    	year = 2013,
    	journal = "APPLICAZIONI LASER",
    	volume = "febbraio/marzo 2013",
    	pages = "42--47"
    }
    

 

Attività Didattiche

Tecnologia meccanica I (L-Z) [Laurea in Ingegneria Meccanica] (Secondo semestre - Secondo Anno)


Per maggiori informazioni consultare il sito di Ateneo e il portale della Didattica .

Attività di Ricerca

PE8 Products and process engineering: product design, process design and control, construction methods, civil engineering, energy systems, material engineering
PE8_7 Mechanical and manufacturing engineering (shaping, mounting, joining, separation)
PE8_8 Materials engineering (metals, ceramics, polymers, composites, etc.)
PE8_9 Production technology, process engineering
Contatti

DIPARTIMENTO DI
MECCANICA, MATEMATICA E MANAGEMENT

Viale Japigia 182 - 70126 Bari

  +39 080 596 2752
  +39 080 596 2741
  PECQuesto indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.
Politecnico di Bari
Catalogo dei prodotti della Ricerca
Poliba Web mail